Foderrensning og sikkerhedsforanstaltninger for kværnmaskine

Kværn Maskinfoder: bekræft den normale drift afKværn maskine before feeding. When feeding, first pour the material into the hopper, and gently push the material into the Kværn maskine with a thin stick. Material should not be too large or thick. If abnormal sound is heard in the crushing process, the machine should be shut down immediately for maintenance and restarted after troubleshooting. After feeding, the rotor should be idled for 2-3 minutes to crush and extract all the residual material.

Rengøring afKværn maskine: Because the material is easy to absorb moisture, after crushing, the hopper and the material on the fuselage should be swept into and out of the bag immediately with a long brush, and the feed part of the Kværn maskine should be opened, and the upper part of the Kværn maskine should be cleaned with wet linen or water. After each cleaning should be reinstalled for backup.

Sikkerhedsforanstaltninger afKværn maskine:
1. Brug maskinen i nøje overensstemmelse med forskrifterne. Over- og overbelastningsarbejde er strengt forbudt.
2, efter støvlen må operatøren ikke forlade arbejdet, stå på siden af ​​maskinen for at arbejde
3, høre unormal lyd eller vibration bør straks stoppe kontrollen, ikke arbejde med sygdom.
4. Ved fodring bør materialerne ikke indsættes for dybt. Stik ikke din hånd direkte ind.
5, når man arbejder, er det strengt forbudt at bruge metalhårde genstande i udladningsporten.