Metode til regulering og styring af støvsuger

Kontrolmetode forstøvsuger:

1. Inden fejlsøgning skal vi lukke døren til vakuumtørringsskabet, stramme dørhåndtaget, derefter lukke luftudløsningsventilen og åbne vakuumventilen. Naturligvis kan vakuumventilens kontakt være stram til én brug, og den kan drejes kraftigt. Vi kan bruge det vedhæftede tilbehør til at forbinde vakuumrøret, fastslutte vakuumtørringssugrøret og vakuumpumpen.

2. When the vacuum pump power is turned on, it is necessary to start pumping. First, close the vacuum valve, and then turn off the vacuum pump power to prevent the oil in the vacuum pump from flowing back into the working chamber. At this time, the inside of the støvsuger is in a vacuum state.

3. Tænd for strømmen til støvsuger first, then its power light will light up and perform a self-check, and then it will indicate that it has entered the state at this time. Set the temperature of the støvsuger. When the temperature in the set machine is close to the specified temperature, the heating starts to enter the adjustment stage. It is normal that the measured temperature of the instrument exceeds the set temperature and the elongation is also lower than the set temperature. Therefore, if the temperature is already close to or equal to the set temperature when measuring the temperature, it can almost enter a constant temperature state after another 1-2 hours. If the required temperature is relatively low, you can use the second setting method to let it enter the constant temperature state as soon as possible.